•  Air Conditioning and Refrigeration, reversible ratchet   wrench (3/16",  1/4", 5/16", 3/8") 

•  Adjustable open end wrench 10" with insulated handle

•  Standard slot 8" screwdriver (or reversible)

•  Phillips 8" screwdriver (or reversible)

•  Wire stripper and crimping tool with insulated handle

•  Pressure pliers (vise grip)

•  Slip joint pliers 7" (insulated handles)

•  Measuring tape with lock  (i.e. 12ft. 16ft. 25ft)

•  Ball peen hammer (16 oz.)

•  Digital thermometer 

•  Mechanical swaging and flaring tool set (flaring bar, cone and yoke) includes Sizes 1/4",  3/8", 1/2", and 5/8". (swaging tools)

•  Tube cutter with reamer 1/4"- 7/8" tube sizes

•  Nut drivers tool set

•  Air conditioning and refrigeration manifold set with hoses

•  Ampere/Volt/Ohm meter, digital (Field Piece LT16A or compatible model)  

•  Torpedo level 9"

•  Ductulator (duct sizing tool) Trane or Heil

•  Tool box with lock

•  Safety glasses (clear with shields) which meet OSHA standards

•  Welder striker

•  Duct knife (single edge knife accepted)

•  Flashlight

•  Long Nose Pliers

•  ¼ Seal Right Coupler Adapter

•  Hex Key Wrench Insert 3/16

Approved By:    Guadalupe Hernandez    

                            Program Chairman

                           Revised (09/29/07)

Resources